The package (color box) includes:
1. 500mW 802.11 b/g indoor PEN BOOSTER + 3 dBi
2. RP SMA female to RP TNC male adapter
3. 5 dBi Dipole antenna with RP SMA male (WL-DA-5-RSMA)
4. Carry bag
500mW High Performance Pen Booster RF Amplifier with the stretches out to the RP SMA male connector for direct replacement of your Dipole antenna. If your wireless router uses a
RP TNC connector such as the Linksys WRT54GS and WAP54G, you could use the RP SMA female to RP TNC male adapter for conversion.
The RP SMA and RP TNC RF connectors are able to cover most of the 802.11b/g wireless routers and PCI wireless adapter for direct connection.
It can be replaced by more powerful directional antenna such as the Omni, Panel, Yagi and Grid antenna to meet your coverage and range extension requirements.
Key Feature:
1. IEEE 802.11b/g compatible
2. Increase the wireless signal throughput and signal range
3. For using with detachable 2.4GHz antenna equipments
4. Easy installation no software require
5. Working with different wireless
Access Point, Router,PCI wireless card, wireless USB adapter in 2.4GHz
6. RTNC adapter easy work with different type AP/Router
7. Free carry bag
Specification
Model Name Penbooster (High Power)
Operating Range 2400~2500 MHz
Operating Mode Bi-directional, half-duplex, time division duplex senses RF carrier from transmitter and automatically switch receiving to transmitting mode
Antenna 3dBi Dipole Antenna(RP-SMA)
Connector Type SMA + SMA Receptacle (50 ohm)
Transmit Gain 13 ~ 14 dB
RF Input Power 0 ~ 15 dBm
RF Output Power 500mW (27 dBm at 15 dBm RF input power)
100mW (20 dBm at 6 dBm RF input power)
Receiver Gain ≤12 dB
Noise Figure 3.5dB typical
Frequency Response ±1dB over operating range
Power Adaptor DC 5V /1A 105~240V for AC Adapter
DC Jack Plug 2.8 x 0.7 x 12 mm
Operating Temp. -20 to +70 °C
Operating Humidity Up to 95% relative humidity
LED Tx LED(red) and Power LED(yellow)
RF Adapter RP TNC(M) TO RP SMA(F)
Housing (cm) 118mm(L) x 25.5mm(W) x 16mm(H)
